General Description - Sterilizer steam autoclave
Product Description
Stand-alone table top steam sterilizer with drying cycle
Program control unit for fully automated process control, with temperature up to 134 C
Liquid temperature-control unit and pressure device (for sterilization of liquids)
Internal chamber volume
Autoclave recoiling system
Single door, self-sealing with high-quality silicone gasket
Epoxy coated metal housing, interior chamber of stainless steel
Fit with 5L water reservoir, auto-fill and autonomy for approximately 10
cycles Water circuit with high-efficiency bacteriological filter
Soft-touch control panel allow easy cleaning
Panel reports operating temperature, pressure and time, low-water level ,
as well as system errors (e.g. door)
Safety feature protect against overpressure and over-temperature
Audio visual alarm at cycle end and in case of failure of potential
danger
Power requirements 110- 220V / 50Hz-60Hz, with voltage surge protection
Capacity 28 L, 75 -200 L,110-880L available
Intended purpose :
Autoclaves are also known as steam sterilizers, and are typically used for healthcare of industrial applications. An autoclave is a machine that uses steam under pressure to kill harmful bacteria, viruses, fungi, and spores on items that are placed inside a pressure vessel."
Supplied with
UPS to ensure power supply for 30 minutes 2 x Bacteriological
air filters (spare) 2 x Gaskets (spare) Start-up supplies Instructions for use, preventive maintenance and troubleshooting in English, French and Spanish
Instructions for use Bench-top equipment used to sterilize small items of equipment and reagents Used mainly at secondary, tertiary and reference
facilities (laboratory network levels II-IV)"
Regulatory & Conformity Requirements
CE mark Comply to EU Council Directive 93/42/EEC (MDD) of EU Regulations 2017/745 (MDR) with valid EC Certificate and Declaration of Conformity for the CE mark is applicable.
US FDA 510(K) clearance
CE certificate available for Class IIa and above devices
Manufacturer’s Quality Management System is certified to ISO 13485 : 2016
Classification:
Classified under EU MDR 2017/745 as Class IIb device"
Safety and EMC standards
EN61010-1 :2001 EN/61010-2 040:2005
EN 61326-1:2006 EMC Directive 89/336 EN 60529:1991 Degree of enclosure
Protection (IPX4) EN 60529:1991 Degree of enclosure Protection (IPX4)"Environmental Compliances
Storage conditions: 0 - 50°C / 90% RH.
Operating conditions: 10 - 40°C / 90% RH.
Operating altitude:
Atmospheric pressure: 1 – 70 kPa
Product Description
Stand-alone table top steam sterilizer with drying cycle
Program control unit for fully automated process control, with temperature up to 134 C
Liquid temperature-control unit and pressure device (for sterilization of liquids)
Internal chamber volume
Autoclave recoiling system
Single door, self-sealing with high-quality silicone gasket
Epoxy coated metal housing, interior chamber of stainless steel
Fit with 5L water reservoir, auto-fill and autonomy for approximately 10
cycles Water circuit with high-efficiency bacteriological filter
Soft-touch control panel allow easy cleaning
Panel reports operating temperature, pressure and time, low-water level ,
as well as system errors (e.g. door)
Safety feature protect against overpressure and over-temperature
Audio visual alarm at cycle end and in case of failure of potential
danger
Power requirements 110- 220V / 50Hz-60Hz, with voltage surge protection
Capacity 28 L, 75 -200 L,110-880L available
Intended purpose :
Autoclaves are also known as steam sterilizers, and are typically used for healthcare of industrial applications. An autoclave is a machine that uses steam under pressure to kill harmful bacteria, viruses, fungi, and spores on items that are placed inside a pressure vessel."
Supplied with
UPS to ensure power supply for 30 minutes 2 x Bacteriological
air filters (spare) 2 x Gaskets (spare) Start-up supplies Instructions for use, preventive maintenance and troubleshooting in English, French and Spanish
Instructions for use Bench-top equipment used to sterilize small items of equipment and reagents Used mainly at secondary, tertiary and reference
facilities (laboratory network levels II-IV)"
Regulatory & Conformity Requirements
CE mark Comply to EU Council Directive 93/42/EEC (MDD) of EU Regulations 2017/745 (MDR) with valid EC Certificate and Declaration of Conformity for the CE mark is applicable.
US FDA 510(K) clearance
CE certificate available for Class IIa and above devices
Manufacturer’s Quality Management System is certified to ISO 13485 : 2016
Classification:
Classified under EU MDR 2017/745 as Class IIb device"
Safety and EMC standards
EN61010-1 :2001 EN/61010-2 040:2005
EN 61326-1:2006 EMC Directive 89/336 EN 60529:1991 Degree of enclosure
Protection (IPX4) EN 60529:1991 Degree of enclosure Protection (IPX4)"Environmental Compliances
Storage conditions: 0 - 50°C / 90% RH.
Operating conditions: 10 - 40°C / 90% RH.
Operating altitude:
Atmospheric pressure: 1 – 70 kPa
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $1,800.00 |