Coverall, PPE Cat. III, 3b/4b/5b/6b, disposable
Coverall, protection, Category III, type 3b (liquid tight)
Coverall, protection, Category III, type 4b (spray tight)
Coverall, protection, Category III, type 5b (particle tight, limited splash-proof)
Coverall, protection, Category III, type 6b (particle tight, limited splash-proof)
General description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Protective clothing (PPE) category III
Technical specifications:
Elasticated hood around face.
Elasticated cuffs and ankles.
Protective seams providing barrier equal to fabric.
Zipper at the front with resealable flap protecting leakage through seams.
Each coverall has a stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
Colour: White/ yellow/orange
Material: Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa
Non-sterile
Single Use, disposable
sizes, indicative only, cm: M: 166-174 ; L: 174-182; XL: 182-190
Shelf life 3-5 years
Intended use:
Disposable liquid-tight biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
After use, the coverall must be disposed of in a biohazard waste container, collected and destroyed. This is also applicable if the coverall is damaged (perforation, etc.). Please refer to WHO publication Safe management of waste for Health Care.
Packaging and labelling:
Instructions for use in English/Arabic/Spanish/French, storage and disposal instructions, warnings, pictograms as applicable
Packaging: One (1) unit in a plastic bag.
Labelling on primary packaging (one unit) must include:
- Name and/of trademark of the manufacturer
- Manufacturer address
- Manufacturer's product reference (product code)
- Type of product and main characteristics
- If the packaging is not transparent, it must bear a diagram showing the essential parts of the product
- Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (of equivalent harmonised symbol)
- Information for handling, if applicable (of equivalent harmonised symbol)
- Words ‘Non-sterile, disposable, single use’
- CE mark (+ EC REP), FDA, and equivalent
-Harmonized pictograms to indicate compliance to the type (3B, 4B, 5B, 6B of combinations) and applicable standards
Coverall, protection, Category III, type 3b (liquid tight)
Coverall, protection, Category III, type 4b (spray tight)
Coverall, protection, Category III, type 5b (particle tight, limited splash-proof)
Coverall, protection, Category III, type 6b (particle tight, limited splash-proof)
General description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Protective clothing (PPE) category III
Technical specifications:
Elasticated hood around face.
Elasticated cuffs and ankles.
Protective seams providing barrier equal to fabric.
Zipper at the front with resealable flap protecting leakage through seams.
Each coverall has a stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
Colour: White/ yellow/orange
Material: Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa
Non-sterile
Single Use, disposable
sizes, indicative only, cm: M: 166-174 ; L: 174-182; XL: 182-190
Shelf life 3-5 years
Intended use:
Disposable liquid-tight biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
After use, the coverall must be disposed of in a biohazard waste container, collected and destroyed. This is also applicable if the coverall is damaged (perforation, etc.). Please refer to WHO publication Safe management of waste for Health Care.
Packaging and labelling:
Instructions for use in English/Arabic/Spanish/French, storage and disposal instructions, warnings, pictograms as applicable
Packaging: One (1) unit in a plastic bag.
Labelling on primary packaging (one unit) must include:
- Name and/of trademark of the manufacturer
- Manufacturer address
- Manufacturer's product reference (product code)
- Type of product and main characteristics
- If the packaging is not transparent, it must bear a diagram showing the essential parts of the product
- Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (of equivalent harmonised symbol)
- Information for handling, if applicable (of equivalent harmonised symbol)
- Words ‘Non-sterile, disposable, single use’
- CE mark (+ EC REP), FDA, and equivalent
-Harmonized pictograms to indicate compliance to the type (3B, 4B, 5B, 6B of combinations) and applicable standards
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $4.98 |
