IMPORTANT NOTE:
These technical specifications are generic and may vary depending on the selected vendor.
Product description:
The is product will be used for practicing the cutting and suturing of the adult female perineum and repair of lacerations.
The model must be anatomically realistic of the vulva, perineum and anus, adjustable to different tensions and support the selection of right, left and median incisions for cutting and suturing.
Specifications:
Colour of the model: adult male in appropriate skin tones: Caucasian, Asian, African.
Material of the model: Polyurethane, poly vinyl chloride (free from phthalate plasticizers), silicone rubber, synthetic and natural rubber, other materials as specified by the manufacturer (refer to Conformity and Regulatory requirements included in the Bidding Documents).
Texture of the model: soft and smooth and close to the feel of adult skin as relevant.
Texture friction free to demonstrate the desired procedure.
Internal parts of model: realistically sculpted, anatomically accurate and feel smooth / resilient / bony as relevant and suitable for simulation.
Model’s durability as a frequently used training tool minimum 10 years.
The material of the model withstands extremes of temperature (45'C) and humid conditions
Following items can be and are preferred to be compatible with model- MODELPERINIUMCUT - (Cutting, suturing and repair of perineum simulator):
-MODELCHILDBIRTHADV (Advanced childbirth simulator)
- MODELHAEMORRHAGE - Prevention & management of postpartum haemorrhage simulator
- MODELNEWBORNCPR - Newborn, CPR simulator
Compatibility is not mandatory if the models are compliant as stand alone products and meet the technical requirements. Bidders are requested to inform about any possible compatibility between bid items.
Supplied with:
- Suitable for repeated use or supplied with replacement perineums
- Instructions for use
- A soft/hard carrying case with durability guaranteed under normal use
Optional: - stand. suturing.
Dimensions:
Dimensio must be specified by the manufacturer.
Packaging/labelling:
Primary packaging: Indicate unit of use:
Labelling on the primary packaging:
- Name and/or trademark of the manufacturer.
- Manufacturer's product reference.
- Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT" (or equivalent harmonised symbol) (if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
Quantity of items per packaging unit should be based on the following scale of sizes: 1 - 2 - 5 - 10 - 20 - 50 - 100 where applicable, taking into consideration the following information:
- Max weight per carton: 25 kg.
- Size of carton: Modularized based on EUR1 size pallet: 1200 mm (L) x 800 mm (W) x 1200 mm (H incl. pallet.)
Strength of carton: For storage and handling the following minimum values should be met: Corrugated carton in BC profile (7 mm), with edgewise crush resistance value 15 or more in temperate climate and at least half that in tropical climate (90% humidity and 40°C), measured according to SIS 84 30 03 (Swedish Standard) or similar
These technical specifications are generic and may vary depending on the selected vendor.
Product description:
The is product will be used for practicing the cutting and suturing of the adult female perineum and repair of lacerations.
The model must be anatomically realistic of the vulva, perineum and anus, adjustable to different tensions and support the selection of right, left and median incisions for cutting and suturing.
Specifications:
Colour of the model: adult male in appropriate skin tones: Caucasian, Asian, African.
Material of the model: Polyurethane, poly vinyl chloride (free from phthalate plasticizers), silicone rubber, synthetic and natural rubber, other materials as specified by the manufacturer (refer to Conformity and Regulatory requirements included in the Bidding Documents).
Texture of the model: soft and smooth and close to the feel of adult skin as relevant.
Texture friction free to demonstrate the desired procedure.
Internal parts of model: realistically sculpted, anatomically accurate and feel smooth / resilient / bony as relevant and suitable for simulation.
Model’s durability as a frequently used training tool minimum 10 years.
The material of the model withstands extremes of temperature (45'C) and humid conditions
Following items can be and are preferred to be compatible with model- MODELPERINIUMCUT - (Cutting, suturing and repair of perineum simulator):
-MODELCHILDBIRTHADV (Advanced childbirth simulator)
- MODELHAEMORRHAGE - Prevention & management of postpartum haemorrhage simulator
- MODELNEWBORNCPR - Newborn, CPR simulator
Compatibility is not mandatory if the models are compliant as stand alone products and meet the technical requirements. Bidders are requested to inform about any possible compatibility between bid items.
Supplied with:
- Suitable for repeated use or supplied with replacement perineums
- Instructions for use
- A soft/hard carrying case with durability guaranteed under normal use
Optional: - stand. suturing.
Dimensions:
Dimensio must be specified by the manufacturer.
Packaging/labelling:
Primary packaging: Indicate unit of use:
Labelling on the primary packaging:
- Name and/or trademark of the manufacturer.
- Manufacturer's product reference.
- Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT" (or equivalent harmonised symbol) (if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
Quantity of items per packaging unit should be based on the following scale of sizes: 1 - 2 - 5 - 10 - 20 - 50 - 100 where applicable, taking into consideration the following information:
- Max weight per carton: 25 kg.
- Size of carton: Modularized based on EUR1 size pallet: 1200 mm (L) x 800 mm (W) x 1200 mm (H incl. pallet.)
Strength of carton: For storage and handling the following minimum values should be met: Corrugated carton in BC profile (7 mm), with edgewise crush resistance value 15 or more in temperate climate and at least half that in tropical climate (90% humidity and 40°C), measured according to SIS 84 30 03 (Swedish Standard) or similar
| Pack Size | Avg. Price |
|---|---|
| Each | $91.32 |
