GENERAL DESCRIPTION
Incubator, infant, automatic, with accessories
Neonatal incubator, double-wall canopy, mobile.
INTENDED USE
An infant incubator provides a closed, controlled environment that warms an infant by circulating heated air over the skin. The heat is then absorbed into the body by tissue conduction and blood convection. Ideally, both the skin and core temperatures should be maintained with only minor variations. Incubators feature better temperature control than radiant warmers (overhead heating units), which can overheat of underheat the infant. However, an infant in an incubator is less accessible to the caregiver.
PRODUCT DESCRIPTION / TECHNICAL SPECIFICATIONS
The unit is equipped with an automatic/servo-controlled air and skin temperature control.
Microprocessor-based system for temperature and humidity regulation.
Air and skin temperature control modes use thermistor-based automatic servo control.
Air-mode set temperature range is 23-37°C in 0.1°C increments.
Automatic self-test on power up.
Performs internal component diagnostics at regular intervals during operation.
Includes a visual heater power indicator.
Internal backup thermistor.
Includes built-in water reservoir for additional air humidity.
Maximum internal sound level during normal operations is ≤ 60 dB; during audible alarms ≤ 65 db.
Includes an internal Li MH battery, for alarms and memory back up functionality only. The battery does not support normal operation of the unit.
Power requirements either 110 Volt / 60 Hz of 220 Volts – 50 Hz to be specified at the time of ordering.
COMPONENTS
- Transparent cabinet. Latched door on front panel, at a minimum 30 cm high x 75 cm wide.
- Minimum of four latched hand access ports and two iris ports. Minimum of five tube access ports.
- Double-wall with air circulation between the hood and the double wall.
- One door with air curtain.
- Fixed mattress tray that tilts between 0° and at a minimum up to ± 10°
Mattress with removable washable and fluid-resistant cover, minimum dimensions 65 cm long x 37 cm wide.
- Display shows operational status, with set and measured values and alarms.
- Protective bumpers on all four corners.
- Accommodates shelves and I/V poles.
- Mounted on stationary table, base of which is at least 80 cm high
- Mobile version : Four (4) anti-static swivel castors that are at least 10 cm in diameter. A minimum of two (2) the castors are equipped with brakes.
- At least four ports for tubes access to the interior of the hood.
- At least four ports to access the patient.
- At least one door of drawer of accessories base.
-Monitor console platform to fit vital monitor of pulse oximeter preferred.
Incubator, infant, automatic, with accessories
Neonatal incubator, double-wall canopy, mobile.
INTENDED USE
An infant incubator provides a closed, controlled environment that warms an infant by circulating heated air over the skin. The heat is then absorbed into the body by tissue conduction and blood convection. Ideally, both the skin and core temperatures should be maintained with only minor variations. Incubators feature better temperature control than radiant warmers (overhead heating units), which can overheat of underheat the infant. However, an infant in an incubator is less accessible to the caregiver.
PRODUCT DESCRIPTION / TECHNICAL SPECIFICATIONS
The unit is equipped with an automatic/servo-controlled air and skin temperature control.
Microprocessor-based system for temperature and humidity regulation.
Air and skin temperature control modes use thermistor-based automatic servo control.
Air-mode set temperature range is 23-37°C in 0.1°C increments.
Automatic self-test on power up.
Performs internal component diagnostics at regular intervals during operation.
Includes a visual heater power indicator.
Internal backup thermistor.
Includes built-in water reservoir for additional air humidity.
Maximum internal sound level during normal operations is ≤ 60 dB; during audible alarms ≤ 65 db.
Includes an internal Li MH battery, for alarms and memory back up functionality only. The battery does not support normal operation of the unit.
Power requirements either 110 Volt / 60 Hz of 220 Volts – 50 Hz to be specified at the time of ordering.
COMPONENTS
- Transparent cabinet. Latched door on front panel, at a minimum 30 cm high x 75 cm wide.
- Minimum of four latched hand access ports and two iris ports. Minimum of five tube access ports.
- Double-wall with air circulation between the hood and the double wall.
- One door with air curtain.
- Fixed mattress tray that tilts between 0° and at a minimum up to ± 10°
Mattress with removable washable and fluid-resistant cover, minimum dimensions 65 cm long x 37 cm wide.
- Display shows operational status, with set and measured values and alarms.
- Protective bumpers on all four corners.
- Accommodates shelves and I/V poles.
- Mounted on stationary table, base of which is at least 80 cm high
- Mobile version : Four (4) anti-static swivel castors that are at least 10 cm in diameter. A minimum of two (2) the castors are equipped with brakes.
- At least four ports for tubes access to the interior of the hood.
- At least four ports to access the patient.
- At least one door of drawer of accessories base.
-Monitor console platform to fit vital monitor of pulse oximeter preferred.
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $2,667.60 |
