GENERAL DESCRIPTION
Patient vital signs monitor, 6 parameters, suitable for adults, paediatric/infants and newborn patients.
INTENDED USE
Vital signs monitors are used to measure basic physiologic parameters and track the status of low-acuity patients (patients found in medical-surgical areas, emergency departments, and ambulatory care centres) so that clinicians can be informed of changes in a patient's condition.
PRODUCT DESCRIPTION / TECHNICAL SPECIFICATIONS
Measures and stores patient status for the following:
EGC, with ST Segment Analysis
Heart rate (HR)
Respiration rate (RR)
Invasive blood pressure (IBP)
Non-invasive blood pressure (NIBP)
Arrhythmia
Pulse rate
Temperature
Cardiac output
(Central) apnoea
SpO2
With colour display monitor. At least 3 channel
Digital display of all active parameters and trace display of at least three selectable parameters
Unwanted parameters can be deselected from display
MEASUREMENT, RANGES
ECG leads I, II, III
HR at least 30 to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm
RR at least 0 to 100 bpm, minimum gradation 1 bpm
Blood pressure monitoring at least 30 to 300 mmHg, minimum gradation 1 mmHg
Temperature range at least 30 to 40 deg C, minimum gradation 0.1 deg C
SpO2 at least 70 to 99 %, with accuracy better than ± 3% and minimum gradation 1%"
"NIBP Oscillo metric step deflation, manual/automatic, initial inflation pressure user selectable.
Sensitivity (amplitude) of all signals user adjustable
Standardising marker, 1mV
Temperature probe to be reusable, external skin contact type
Data interface (for ECG) RS232, BNC, USB of equivalent
Viewing monitor: minimum 10-inch
Adjustable signal amplitude and sensitivity.
Multi-waveform and parameters visualization, up to 7 wave forms simultaneously.
Defibrillator sync and protection.
Patient information and trend internal database.
Ability to save a minimum of 72 events.
Trend storage ≥ 24 hours.
Suitable for standard bed/wall rail and pole stand mount.
Robust design for use in demanding environment.
Designed for frequent and easy dismount and disinfection with hospital-grade products.
Automatic self-test and continuous system monitoring.
Built-in rechargeable battery, autonomy of at least 2 hours.
Automatic switch to battery in case of power failure, automatic recharge on connection to mains.
Main cable at least 3 meter long.
Electrical protection provided by fuses in both live and neutral supply lines.
Power requirements: 100 - 240 Volts - 50/60 Hz (not necessarily in a single unit).
Patient vital signs monitor, 6 parameters, suitable for adults, paediatric/infants and newborn patients.
INTENDED USE
Vital signs monitors are used to measure basic physiologic parameters and track the status of low-acuity patients (patients found in medical-surgical areas, emergency departments, and ambulatory care centres) so that clinicians can be informed of changes in a patient's condition.
PRODUCT DESCRIPTION / TECHNICAL SPECIFICATIONS
Measures and stores patient status for the following:
EGC, with ST Segment Analysis
Heart rate (HR)
Respiration rate (RR)
Invasive blood pressure (IBP)
Non-invasive blood pressure (NIBP)
Arrhythmia
Pulse rate
Temperature
Cardiac output
(Central) apnoea
SpO2
With colour display monitor. At least 3 channel
Digital display of all active parameters and trace display of at least three selectable parameters
Unwanted parameters can be deselected from display
MEASUREMENT, RANGES
ECG leads I, II, III
HR at least 30 to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm
RR at least 0 to 100 bpm, minimum gradation 1 bpm
Blood pressure monitoring at least 30 to 300 mmHg, minimum gradation 1 mmHg
Temperature range at least 30 to 40 deg C, minimum gradation 0.1 deg C
SpO2 at least 70 to 99 %, with accuracy better than ± 3% and minimum gradation 1%"
"NIBP Oscillo metric step deflation, manual/automatic, initial inflation pressure user selectable.
Sensitivity (amplitude) of all signals user adjustable
Standardising marker, 1mV
Temperature probe to be reusable, external skin contact type
Data interface (for ECG) RS232, BNC, USB of equivalent
Viewing monitor: minimum 10-inch
Adjustable signal amplitude and sensitivity.
Multi-waveform and parameters visualization, up to 7 wave forms simultaneously.
Defibrillator sync and protection.
Patient information and trend internal database.
Ability to save a minimum of 72 events.
Trend storage ≥ 24 hours.
Suitable for standard bed/wall rail and pole stand mount.
Robust design for use in demanding environment.
Designed for frequent and easy dismount and disinfection with hospital-grade products.
Automatic self-test and continuous system monitoring.
Built-in rechargeable battery, autonomy of at least 2 hours.
Automatic switch to battery in case of power failure, automatic recharge on connection to mains.
Main cable at least 3 meter long.
Electrical protection provided by fuses in both live and neutral supply lines.
Power requirements: 100 - 240 Volts - 50/60 Hz (not necessarily in a single unit).
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $2,371.16 |
