Intended purpose of use: Operating scissors that have all the functionality of standard operating scissors, but also feature a delicate pattern. The tip configuration sharp/blunt allow these scissors to be used for sharp and blunt dissection during surgical procedures.
Product description:
Long surgical dissecting scissors, Deaver, for basic surgical operations (sutures of for treating abscesses) and for fistula repair.
Material: Martensitic stainless steel (quenched, magnetic steel) Steel composition: 0.35 to 0.40 % carbon; 14% to 15 % chromium.
Straight, with one pointed and one blunt end blade.
Length: Approx.140mm.
Supplied non sterile, Hygienically packed for medical use after sterilization.
Reusable: Can withstand repeated reprocessing including steam sterilization, including manual brushing and the use of disinfectant chemicals.
Supplied with:
Manufacturer's instruction for use.
Instructions for use:
For basic surgical operations.
This item must be cleaned, disinfected after each use, and sterilised in a steam steriliser.
Packaging & Labelling:
Primary packaging: Unit of use.
One (1) scissors in a plastic bag.
Labelling on the primary packaging:
Name and/of trademark of the manufacturer.
Manufacturer's product reference.
Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT"(of equivalent harmonised symbol)(if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (of equivalent harmonised symbol).
Information for handling, if applicable (of equivalent harmonised symbol).
Secondary packaging: Protected unit.
Ten (10) scissors in a box.
Labelling on the secondary packaging:
Labelling to be the same as primary packaging.
Extra information required: Number of units per secondary packaging.
Over packaging: Packaging unit.
Symbols used according ISO 15223.
CE mark, Labelling as per regulations applied to the device. Shall include name of the device, name and address of the manufacturer, product code of manufacturers reference number etc.
Regulatory & Conformity Requirements:
CE mark Comply to EU Council Directive 93/42/EEC (MDD) of EU Regulations 2017/745 (MDR) with valid EC Certificate and Declaration of Conformity for the CE mark is applicable.
US FDA 510(K) clearance.
CE certificate available for Class IIa and above devices.
Manufacturer’s Quality Management System is certified to ISO 13485 : 2016.
Classification:
Classified under EU MDR 2017/745 as Class I device.
Safety & product Standards:
Must comply with the following standards (as per latest revision of standards):
ISO 14971:2007 Medical Devices- Application of risk management to medical devices.
ISO 7153-1:1991/Amd1:1999 Surgical instruments- Metallic material – Part 1 Stainless Steel.
ISO 13402:1995 Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure.
ISO 17664:2004 Sterilization of medical devices -- Information to be provided by the manufacturer for the processing of re-sterilizable medical devices.
ISO 7741 Instruments for surgery -- Scissors and shears -- General requirements and test methods.
Environmental requirements: ISO 14001.
Product description:
Long surgical dissecting scissors, Deaver, for basic surgical operations (sutures of for treating abscesses) and for fistula repair.
Material: Martensitic stainless steel (quenched, magnetic steel) Steel composition: 0.35 to 0.40 % carbon; 14% to 15 % chromium.
Straight, with one pointed and one blunt end blade.
Length: Approx.140mm.
Supplied non sterile, Hygienically packed for medical use after sterilization.
Reusable: Can withstand repeated reprocessing including steam sterilization, including manual brushing and the use of disinfectant chemicals.
Supplied with:
Manufacturer's instruction for use.
Instructions for use:
For basic surgical operations.
This item must be cleaned, disinfected after each use, and sterilised in a steam steriliser.
Packaging & Labelling:
Primary packaging: Unit of use.
One (1) scissors in a plastic bag.
Labelling on the primary packaging:
Name and/of trademark of the manufacturer.
Manufacturer's product reference.
Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT"(of equivalent harmonised symbol)(if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (of equivalent harmonised symbol).
Information for handling, if applicable (of equivalent harmonised symbol).
Secondary packaging: Protected unit.
Ten (10) scissors in a box.
Labelling on the secondary packaging:
Labelling to be the same as primary packaging.
Extra information required: Number of units per secondary packaging.
Over packaging: Packaging unit.
Symbols used according ISO 15223.
CE mark, Labelling as per regulations applied to the device. Shall include name of the device, name and address of the manufacturer, product code of manufacturers reference number etc.
Regulatory & Conformity Requirements:
CE mark Comply to EU Council Directive 93/42/EEC (MDD) of EU Regulations 2017/745 (MDR) with valid EC Certificate and Declaration of Conformity for the CE mark is applicable.
US FDA 510(K) clearance.
CE certificate available for Class IIa and above devices.
Manufacturer’s Quality Management System is certified to ISO 13485 : 2016.
Classification:
Classified under EU MDR 2017/745 as Class I device.
Safety & product Standards:
Must comply with the following standards (as per latest revision of standards):
ISO 14971:2007 Medical Devices- Application of risk management to medical devices.
ISO 7153-1:1991/Amd1:1999 Surgical instruments- Metallic material – Part 1 Stainless Steel.
ISO 13402:1995 Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure.
ISO 17664:2004 Sterilization of medical devices -- Information to be provided by the manufacturer for the processing of re-sterilizable medical devices.
ISO 7741 Instruments for surgery -- Scissors and shears -- General requirements and test methods.
Environmental requirements: ISO 14001.
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $1.55 |
