IMPORTANT NOTE:
These technical specifications are generic and may vary depending on the selected vendor.
Product description:
Newborn simulator to facilitate learning complete newborn care, including cord cutting and ligation, as well as newborn resuscitation, dark complexion
Specifications:
Simulator consists of a dark skin manikin, that has an appearance and size of full term infant with umbilical cord.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulate a baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
Material of the simulator: Polyurethane, poly vinyl chloride (free from phthalate plasticizers), silicone rubber, synthetic and natural rubber, other materials as specified by the manufacturer (refer to Conformity and Regulatory requirements included in the Bidding Documents). The composition of any fabric used in this simulator specified by the manufacturer.
It is acknowledged design and capability of different simulators may vary therefore the manufacturer must state component parts, functionality and capability of the simulator supplied. May include simulation of foetal heart sounds and internal components that demonstrate when the lungs are functioning.
Materials and component parts: withstand extremes of temperature up to 45' Celsius and humid conditions.
Supplied with:
- 2 sheets for drying and wrapping a newborn.
- 1 head cap
- 1 umbilical cord, that can be cut and attached several times for demonstration purposes
- 2 umbilical ties or clamps
- suction device, portable, hand-held, manual to clear newborn’s airway. Translucent, made of silicone or other similar material, which is easy to clean and can withstand sterilization
- self-inflating neonatal resuscitation bag with 2 translucent masks: size 0 and size 1.
- shoulder bag for transport/storage
- instructions for use in English, French and Spanish, including pictographs
Packaging/labelng:
Primary packaging: Indicate unit of use:
Labelling on the primary packaging:
- Name and/or trademark of the manufacturer.
- Manufacturer's product reference.
- Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT" (or equivalent harmonised symbol) (if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
Quantity of items per packaging unit should be based on the following scale of sizes: 1 - 2 - 5 - 10 - 20 - 50 - 100 where applicable, taking into consideration the following information:
- Max weight per carton: 25 kg.
- Size of carton: Modularized based on EUR1 size pallet: 1200 mm (L) x 800 mm (W) x 1200 mm (H incl. pallet.)
Strength of carton: For storage and handling the following minimum values should be met: Corrugated carton in BC profile (7 mm), with edgewise crush resistance value 15 or more in temperate climate and at least half that in tropical climate (90% humidity and 40°C), measured according to SIS 84 30 03 (Swedish Standard) or similar
These technical specifications are generic and may vary depending on the selected vendor.
Product description:
Newborn simulator to facilitate learning complete newborn care, including cord cutting and ligation, as well as newborn resuscitation, dark complexion
Specifications:
Simulator consists of a dark skin manikin, that has an appearance and size of full term infant with umbilical cord.
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulate a baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
Material of the simulator: Polyurethane, poly vinyl chloride (free from phthalate plasticizers), silicone rubber, synthetic and natural rubber, other materials as specified by the manufacturer (refer to Conformity and Regulatory requirements included in the Bidding Documents). The composition of any fabric used in this simulator specified by the manufacturer.
It is acknowledged design and capability of different simulators may vary therefore the manufacturer must state component parts, functionality and capability of the simulator supplied. May include simulation of foetal heart sounds and internal components that demonstrate when the lungs are functioning.
Materials and component parts: withstand extremes of temperature up to 45' Celsius and humid conditions.
Supplied with:
- 2 sheets for drying and wrapping a newborn.
- 1 head cap
- 1 umbilical cord, that can be cut and attached several times for demonstration purposes
- 2 umbilical ties or clamps
- suction device, portable, hand-held, manual to clear newborn’s airway. Translucent, made of silicone or other similar material, which is easy to clean and can withstand sterilization
- self-inflating neonatal resuscitation bag with 2 translucent masks: size 0 and size 1.
- shoulder bag for transport/storage
- instructions for use in English, French and Spanish, including pictographs
Packaging/labelng:
Primary packaging: Indicate unit of use:
Labelling on the primary packaging:
- Name and/or trademark of the manufacturer.
- Manufacturer's product reference.
- Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT" (or equivalent harmonised symbol) (if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
Quantity of items per packaging unit should be based on the following scale of sizes: 1 - 2 - 5 - 10 - 20 - 50 - 100 where applicable, taking into consideration the following information:
- Max weight per carton: 25 kg.
- Size of carton: Modularized based on EUR1 size pallet: 1200 mm (L) x 800 mm (W) x 1200 mm (H incl. pallet.)
Strength of carton: For storage and handling the following minimum values should be met: Corrugated carton in BC profile (7 mm), with edgewise crush resistance value 15 or more in temperate climate and at least half that in tropical climate (90% humidity and 40°C), measured according to SIS 84 30 03 (Swedish Standard) or similar
| Pack Size | Avg. Price |
|---|---|
| Each | $102.06 |
