IMPORTANT NOTE:
These technical specifications are generic and may vary depending on the selected Vendor.
Product description:
Seamless tray with cover, rectangular with rounded corners, stainless steel, smooth surface.
Material: Austenitic stainless steel
With cover
Length: approximately 225mm.
Width: approximately 125mm.
Height: approximately 50mm.
Thickness: min. 0.8mm.
Packaging and labelling:
Primary packaging: Unit of use
One (1) instruments tray with cover protected by adhesive plastic film.
Labelling on the primary packaging:
Name and/or trademark of the manufacturer.
Manufacturer's product reference.
Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT"(or equivalent harmonised symbol), if applicable.
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
X instruments trays with cover in a box
Labelling on the packaging unit:
Labelling to be the same as primary packaging.
Extra information required: Number of units per box.
Symbols used according ISO 15223
CE Mark.
Instructions for use:
Basic equipment for nursing and surgical care.
The size has been chosen as being the most commonly used.
Note: Do not use a stainless steel container to hold a chlorine solution, as this may damage the stainless steel; use a plastic container.
This item must be cleaned, disinfected after each use.
It can be sterilized in a steam sterilizer when necessary.
Regulation & conformity requirements:
CE mark conforming to Medical Device Directive 93/42/EEC
CE self-declaration.
ISO 13845:2003 certified
Classification:
93/42/EEC Class I โ Self declaration / CE cert
Safety & product Standards:
Must comply with following standards
ISO 7153-1:1991 Surgical instruments --Metallic materials --Part 1: Stainless steel
These technical specifications are generic and may vary depending on the selected Vendor.
Product description:
Seamless tray with cover, rectangular with rounded corners, stainless steel, smooth surface.
Material: Austenitic stainless steel
With cover
Length: approximately 225mm.
Width: approximately 125mm.
Height: approximately 50mm.
Thickness: min. 0.8mm.
Packaging and labelling:
Primary packaging: Unit of use
One (1) instruments tray with cover protected by adhesive plastic film.
Labelling on the primary packaging:
Name and/or trademark of the manufacturer.
Manufacturer's product reference.
Type of product and main characteristics.
If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT"(or equivalent harmonised symbol), if applicable.
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol).
Information for handling, if applicable (or equivalent harmonised symbol).
Over packaging: Packaging unit
X instruments trays with cover in a box
Labelling on the packaging unit:
Labelling to be the same as primary packaging.
Extra information required: Number of units per box.
Symbols used according ISO 15223
CE Mark.
Instructions for use:
Basic equipment for nursing and surgical care.
The size has been chosen as being the most commonly used.
Note: Do not use a stainless steel container to hold a chlorine solution, as this may damage the stainless steel; use a plastic container.
This item must be cleaned, disinfected after each use.
It can be sterilized in a steam sterilizer when necessary.
Regulation & conformity requirements:
CE mark conforming to Medical Device Directive 93/42/EEC
CE self-declaration.
ISO 13845:2003 certified
Classification:
93/42/EEC Class I โ Self declaration / CE cert
Safety & product Standards:
Must comply with following standards
ISO 7153-1:1991 Surgical instruments --Metallic materials --Part 1: Stainless steel
| Pack Size | Avg. Price |
|---|---|
| Pack of 1 | $8.96 |
